Soft Rubber Decompression Toy Manufacturer

Home / All / Company Information / China's New National Standard for Decompression Toys Takes Effect: GB 6675.14-2025 Raises the Chemical-Safety Bar

China's New National Standard for Decompression Toys Takes Effect: GB 6675.14-2025 Raises the Chemical-Safety Bar

Nov 6,2026

On November 1, 2026, China's new mandatory national standard for decompression (stress-relief) toys — GB 6675.14-2025 — officially took effect. It pushes chemical-safety controls well beyond the old GB 6675 baseline: restricted phthalates grow from 6 to 10 types, and new limits appear for formaldehyde, benzene, toluene, xylene, total VOC (TVOC) release and migratable boron. Notably, TVOC release is the world's first toy-specific metric of its kind. For a decompression-toy factory like PlayGoro, the standard is both a compliance floor and a quality differentiator.

A stack of colorful squeeze and decompression toys, representing the product category covered by the new GB standard

What changed

The upgrade is concrete and measurable. Three points matter most for any manufacturer selling in or exporting to China:

  • Phthalate expansion: Restricted phthalate plasticizers widened from 6 to 10 types, tightening control over the soft PVC / TPR materials common in squishies and squeeze toys.
  • New chemical limits: Formaldehyde, benzene, toluene, xylene, TVOC release and migratable element boron now carry explicit permissible limits.
  • World-first TVOC metric: TVOC release is a toy-specific indicator proposed for the first time globally by this standard — directly aimed at the sealed-packaging odor complaints of slime and "nie nian le" (squeeze) toys.
A laboratory setting suggesting toy safety and chemical testing for the new standard

The Beijing Consumer Association test signal

The standard did not appear in a vacuum. Ahead of implementation, the Beijing Consumer Association ran a comparative test on 38 decompression toys, referenced against the new standard. The result is a clear warning: slime (crystal mud) and squeeze ("nie nian le") products performed weakly overall — most samples showed elevated TVOC release under sealed conditions and a noticeable pungent odor on opening, while press / other squeeze types fared relatively well. The Association urged enterprises to use the transition window to upgrade: optimize glycerin–silicone ratios and sealing for slime; adopt low-VOC TPR/PU and extend devolatilization and curing time for squeeze toys.

Plush and squeeze toys displayed in a shop window, representing the retail and consumer side of the category

The transition timeline at a glance

Nov 1, 2026
new standard takes effect
2026–2027
new production must comply; old-standard stock may still sell
Nov 1, 2027
all toys in circulation must comply; old exits market
TVOC
world-first toy-specific metric

The timeline gives factories a clear runway. Products marked with the current GB 6675.1–4-2014 can be bought and used normally before Nov 1, 2026; between Nov 1, 2026 and Oct 31, 2027 newly produced toys must meet the new standard while existing old-standard inventory can continue to sell; from Nov 1, 2027 every toy in circulation must comply, and old-standard products fully exit the market. The Association also advises a "three-check" method for buyers: verify label completeness, certification marks (CCC where applicable), and channel reliability.

A colorful arcade filled with plush toys, representing the playful consumer side the new standard protects

Why it matters for exporters

For PlayGoro, the new GB standard is a chance to turn compliance into competitive edge. The higher bar on formaldehyde, benzene, TVOC and boron aligns decompression toys with the stricter expectations already common in the US (CPSC / ASTM F963) and EU (EN 71) — so investing in low-VOC materials and verified testing now pays off across every market, not just China.

Sourcing tip: treat GB 6675.14-2025 as a product-upgrade brief, not a paperwork chore — switch to low-VOC TPR/PU, extend curing / devolatilization, lock in CMA/CNAS third-party testing for the new indicators, and print the correct execution-standard number on packaging. In this category, the standard is the new marketing.

A window, not a blank check

The transition is generous but finite. Factories that upgrade formula, process and labeling during the window will own the "new-standard compliant" shelf tag in 2027; those who wait will be locked out of the China market exactly when demand — see the Korea "malangyi" boom and the US$6.26B global stress-toy market — is peaking.

Are you looking for a reliable manufacturer?

We can quickly provide customers with market analysis, technical support and customized services.
Please send your message to us
*Email
Name
*Phone
*Title
*Content
Upload
  • Only supports .rar/.zip/.jpg/.png/.gif/.doc/.xls/.pdf, maximum 20MB.
follow us